Morley’s – D3 PVA Adhesive 1Ltr

Product DescriptionApplication InstructionsEnsure surfaces to be bonded are clean, dry, and free from contaminants.Apply adhesive thinly to both surfaces and assemble immediately.Joints can be handled after approx. 1 hour.For best results, apply pressure or clamp for 1–2 hours.Support bonded work for 6 hours at 20°C.Note: Drying times will be extended at lower temperatures.Remove excess adhesive with a damp cloth while wet, then sand away dry excess.Do not use below 10°C.Unsuitable for load-bearing joints.Ensure the moisture content of the wood is below 15%.StorageStore in tightly closed original containers.Keep in cool, dry conditions and protect from frost.Shelf life: 12 months from date of manufacture.Shake well before use.Health & SafetyUse good working practices (e.g., wear gloves and eye protection).Wash off adhesive with soap and water.Do not ingest.Avoid contact with skin and eyes. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.Keep out of reach of children.Full details available on the Material Safety Data Sheet (MSDS).Contains a biocidal product for preservation.Active substances: CMIT/MIT and methyl-1,2-benzisothiazol-3(2H)-one.May produce an allergic reaction.Key FeaturesConforms to BS EN 204: Class D3Easy to cleanDries clearFor general woodworking applicationsMedium viscositySolvent-free10-minute set time